超聲波螺栓緊固應力測試儀Delta Sigma擁有全新的人機交互介面，實現螺栓拉伸和負荷資料的測量、顯示、存儲及傳輸。對於螺栓拉伸可實現精准控制。
其檢測原理類似於聲納。超聲波測量螺栓拉伸是通過對緊固件的一端使用音速脈衝來正確測量衝擊時回音從另一段返回的時間。

超聲波螺栓緊固應力測試儀Delta Sigma – 功能介紹

• 超高性價比的超聲波螺栓拉伸及負荷測量設備
• 方便易用的觸控式螢幕，支援手套或手寫筆一同使用
• IP44防護等級，滿足現場使用需求
• 相容 MS Windows及MS Excel，無需其他電腦軟體
• 套裝內已包含溫度探頭，免去手動輸入溫度步驟
• 可通過micro-USB或外接電源適配器進行供電

Ultrasonic Bolt Measurement Delta Sigma

The Delta Sigma pulse-echo ultrasonic time-of-flight (TOF) measurement device; measures, displays, stores and transfers bolt load and elongation data in a new, single purpose unit.

Functions:-

• Low cost ultrasonic bolt elongation and load measuring instrument
• Easy to use touch screen display (can be used with gloves or stylus)
• IP44 rated (sealed for field use)
• Compatible with MS Windows and MS Excel, no need for special PC software
• Temperature probe is included in kit, no need for manual temperature input
• Chargeable instrument by external charger or micro-USB

About Norbar, world leaders in torque equipment

超聲波螺栓緊固應力測試儀Delta Sigma – 產品規格

DELTA SIGMA 套裝

DELTA SIGMA 套裝 – 選配件

DELTA SIGMA 套裝 – 感測器選配件

這篇文章 超聲波螺栓緊固應力測試儀Delta Sigma 最早出現於 鴻石國際股份有限公司。

TruCheck™ 2 & TruCheck™ 2 Plus 功能介紹

• 依據客戶策略監測扭力扳手性能，確保扳手處於巔峰狀態。
• LCD顯示螢幕依據顏色變化顯示清晰的目標指示（Plus版本獨有）。在昏暗區域依舊清晰可見提供雙版本，TruCheck™ 2及TruCheck™ 2 Plus。
• TruCheck™ 2可設置選項極少，便於非專業用戶檢測音響型扭力扳手。
• TruCheck™ 2 Plus可設定扭矩單位，三種操作模式選擇（音響，錶盤及軌跡），最多可存儲15種目標值，12種語言選擇。
• TruCheck™ 2 Plus用戶可設定目標值及公差。
• 讀值精度：±1% （10Nm及1100NmTruCheck™ 2型號的10%量程以下時為±2%）。
• 內置Micro USB 2.0接口實現USB充電。 TruCheck™ 2 Plus支持同時充電及數據傳輸。
• 出廠附順時針方向可溯源校准證書。
• 可遠端升級軟體，無需送返諾霸。

TruCheck™ 2 is a cost effective torque wrench checker that has been redesigned to incorporate improved features whilst maintaining ease of use.
The TruCheck™ 2 aims to cut the cost of purchasing a torque wrench checking system and remove the reservations over the complexity of using such equipment.

TruCheck™ 2 features:-  ( 0.1 – 30 N.m & 3 – 2,100N.m) 

• Allows torque tool performance to be monitored and tools kept in peak condition.
• Allows a selection of torque units, three modes of operation (Click, Dial and Track), the ability to store up to 15 targets and select from 12 languages
• Allows operator to set a target value and tolerance
• Inbuilt Micro USB 2.0 port enables power from any USB power source. Plus versions allows for both power and data transfer simultaneously
• If you order a UKAS accredited calibration certificate (available at extra cost) this certificate will be provided in place of the traceable calibration certificate
• Software can be updated remotely, without the need to return the product to Norbar
• Supplied with traceable calibration certificate in clockwise direction. A counter-clockwise calibration is available at additional cost
• Accuracy: ±1% reading accuracy (±2% when below 10% of range for the 10 N·m TruCheck™ 2 model & the 1,100 N·m TruCheck™ 2 model)
• Display: LCD Display
• Auto Reset Hold Time: 1,2 or 3 seconds
• Power Consumption: 0.5W
• Environment: IP 40
• Electromagnetic Compatibility (EMC) Directive: Designed to comply with EN 61326-1

Power Tool Test Fixture for use with TruCheck 2:-

The Power Tool Test Fixture for TruCheck 2 is a simple, robust device that allows non-impacting power tools up to 2,100 N·m to be tested. The universal torque reaction arrangement will suit reaction arms supplied as standard with most Norbar and other pneumatic, electric and cordless torque tools. A complete system comprises the Test Fixture 80033 along with one of the TruCheck 2 Plus models, either 1,100 N·m (part number 43531) or 2,100 N·m (part number 43533) which must be ordered separately.

Does not include:
– EvoTorque® Battery Tool
– TruCheck™ 2

TruCheck™ 2 & TruCheck™ 2 Plus 產品規格

0.1 – 30 N·m

* 43514，43515，43516及43517帶1∕4″凸六角及1∕4″凹方頭
+ 43518及43519帶10 mm凸六角，1∕4″ 及 3∕8″凹方頭

3 – 2,100 N·m

* 43520及43521帶3/8″凹方頭
+ 43522，43523，43524及43525帶1/2″凹方頭
@ 43528， 43529， 43530及43531帶27 mm凸六角及4/8″凹方頭
^ 43532及43533帶27 mm凸六角及1″凹方頭

扭力測試儀備件

TruCheck™ 2 動力工具測試夾具套組是一個簡便而牢固的設備，可用於最高2100Nm的非衝擊動力工具的檢測。

整個檢測系統由測試夾具及TruCheck™ 2 Plus（另行訂購）組成，可選1100Nm或2100Nm型號，具體取決於所需扭矩量程。通用扭矩反作用裝置適用於絕大多數諾霸和其他品牌的氣動、電動、無線扭力扳手的反作用力臂。

備註：此測試夾具套組不適用於TruCheck™初代產品。

這篇文章 TruCheck™ 2 & TruCheck™ 2 Plus 最早出現於 鴻石國際股份有限公司。

干預式工具測試杯 – 功能介紹

• 符合ISO 13628-8：2002和API 17D。
• 也可用於客戶特定的解決方案。
• 輕巧的鋁結構。
• 裝有提升手柄。
• 在大的測試杯裝有環形螺栓。

Intervention Tool Test Pots Series

Intervention Tool Test Pots allow for the accurate testing of API rotary intervention tools.

Functions:-

• Lightweight all aluminium construction
• Incorporated lifting handles
• Conform to ISO 13628-8:2002 and API 170 First Edition
• Customer specific solutions also available
• Eye bolts provided on larger units

About Norbar, world leaders in torque equipment

干預式工具測試杯 – 產品規格

干預式工具檢驗套裝

其他測試杯和扭矩檢驗套件可用於標準和非標準API干預工具測試和檢驗。

這篇文章 干預式工具測試杯 最早出現於 鴻石國際股份有限公司。

TTL-HE儀器和傳感器套裝 – 功能介紹

• IP65/67 防護等級。
• 雙向校準。
• 用於惡劣環境下的電池電源。
• 所有功能與TST和TTT儀器相同。
• 提供一個防護等級為IP67的攜帶盒。
• 為所有諾霸傳感器提供5位分辨率。
• 240 x 64像素點陣顯示，更新速率為每秒兩次。

TTL-HE Instrument and Transducer Kits

Torque Tester Lite – Harsh Environment (TTL-HE) is a portable torque measuring instrument designed for use in harsh environments. The TTL-HE operating on battery power with one of the ‘HE’ range of transducers connected, has an ingress protection rating of IP65/IP67. Typical operating environments are where high humidity, water or salt water spray and dust may be an issue. Features include; 10 measurement modes, 13 units of torque (with additional USER units feature), 12 pairs of limits and text displayed in 11 languages.

Functions:-

• IP65/IP67 rated.
• Bi-Direction calibration for both instrument and transducer.
• Battery Power use in harsh environments (mains supply for charging).
• Stainless steel design with ‘SMART’ intelligence.
• Limit indication for up to 8 user defined target values
• Continuous RS-232 output
• Analogue Output
• Supplied in a water tight carry case

About Norbar, world leaders in torque equipment

*用於干預工具測試台的套裝

這篇文章 TTL-HE儀器和傳感器套裝 最早出現於 鴻石國際股份有限公司。

智慧動力扭力工具檢測台車-功能介紹

• 滿足多個量程範圍的手動扭力扳手、動力工具的檢測需求。
• 精度±1%。
• 檢測工具範圍覆蓋手動扭力扳手、電動工具、離合器工具以及油壓脈衝工具。
• 手輪加載機構，可靈活調整加載位置，檢測手動扳手時加載平緩，穩定可靠。
• 對數據進行統計分析，滿足基本測量統計，Cm、Cmk等的分析能力。
• 實現動力工具軟硬連接檢測ISO 5393以及VDI/VDE 2647的要求。
• 檢測效率高，檢測完成後一鍵存儲報告並上傳至MES系統。
• 採用油壓/電磁剎車系統，真實模擬客戶螺栓轉動連接環境，精確檢測扳手使用狀況。

• Meet the detection requirements of manual torque wrenches and power tools with multiple ranges.
• Accuracy ±1%.
• The range of testing tools covers manual torque wrenches, electric tools, clutch tools and oil pressure pulse tools.
• The handwheel loading mechanism can flexibly adjust the loading position, and the loading is smooth, stable and reliable when detecting the manual wrench.
• Perform statistical analysis on the data to meet the analysis capabilities of basic measurement statistics, Cm, Cmk, etc.
• Meet the requirements of ISO 5393 and VDI/VDE 2647 for soft and hard connection testing of power tools.
• The detection efficiency is high. After the detection is completed, the report is stored with one click and uploaded to the MES system.
• The oil pressure/electromagnetic brake system is adopted to truly simulate the customer’s bolt rotation connection environment and accurately detect the use of the wrench.

這篇文章 智慧動力扭力工具檢測台車 最早出現於 鴻石國際股份有限公司。

智慧扭力工具檢測車-功能介紹

• 頭部作動加載模式配合全自動變速馬達，通過TMS扭力管理系統 Plus版軟件實現全自動智慧扳手校驗。
• 實時通訊功能，智慧數據管理與追溯。
• 最大靜態檢測值可達1500Nm。最大動態檢測值可達1000N·m。
• 多扭力單位選擇，滿足不同使用需求。
• 設有超載保護及安全保護機構，確保使用安全。
• 可直接將檢測數據傳入系統，自動儲存，實現扭力工具管理、檢測數據處理、CP/CPK、分析、檢測報告自動生成等功能。
• 軟件模塊化設計，涵蓋常用手動及動力工具類型，滿足客戶不同檢測需求。
• 預設多種統計分析指標，便於工具管理。
• 無縫對接客戶MES系統，實現數據智慧統籌管理。
• 內置電源，支持8小時以上持續工作。
• 工作檯面尺寸（mm）：1000*550*900。
• 整體尺寸（mm）：1820*550*1470。

Automatic Intelligent Torque Tools Trolley – Introduction:-

Global exclusive mobile automatic intelligent torque tools trolley which is designed in according with ISO 6789: 2017. Suitable for pipeline measurement at any time. Great reduce measurement costs.
Design for the measurement of small torque power tools and manual torque wrenches. (manual torque wrenches: 1-1500N.m, power tools: 1-700N.m)
The fully automatic loading device loads / unloads torque through a servo motor. The two-stage automatic loading speed is designed to meet the minimum time requirement (between 0.5 s and 2.0 s) for the torque from the 80% target value to the target value according to the ISO6789: 2017-1.
The automatic intelligent torque tools trolley is equipped with a touch screen PC and measurement software, which can identify tools, operators and various information. The software can upload and store measurement data in real time. Set the loading times according to the requirements of ISO6789: 2017-1(Type I and Type II is 5 times, Type III is 10 times) via the software.

Functions:-

• Accuracy: ±0.5%.
• Head automatic / semi-automatic load mode. Intelligent wrench measurement through TMS PLUS Ver. software. Suitable for pipeline measurement at any time in according with ISO6789.
• Easy to get the tool information via scan code for measurement.
• Real-time communication function. Intelligent data management and traceability
• Max static measurement torque value: 1500N.m. Max dynamic measurement torque value: 700N.m.
• Multiple torque unit selection to meet different requirements.
• Overload and safety protection mechanism to ensure use safety.
• Transfer measurement data to the system directly and store automatically. Manage the torque tools with measurement data. CMK / CPK analysis. Generate measurement report automatically and so on.
• Module design software. Cover the common types of manual and power tools to meet customer’s different measurement requirements.
• Customize measurement factors such as measurement times. Generate custom reports.
• Intelligent management torque tools. Set tool’s measurement period and remind via software.
• Optional MES system module. Direct store measurement data in the server for intelligent data management.
  Connect analog bolts and transducers through a fixed ring to measure power tools.
• The reaction arm hangs on the tool trolley during large torque measurement for self-balance.

智慧扭力工具檢測車 – 料號

智慧扭力工具檢測車 – 配件

可選配傳感器

可選配緩衝器

這篇文章 智慧扭力工具檢測車 最早出現於 鴻石國際股份有限公司。

T-Box™ 2

T-Box™ 2 利用其強大的處理器提供無縫且完整的扭矩數據收集包。 這能夠進行工具校準、數據記錄、同步傳感器連接和存檔到您的 PC。

• 精度：讀值±0.05%（低於傳感器5%量程時為±0.1%）。
• 搭配諾霸經典傳感器使用，精度為±0.5%（傳感器量程20%-100%範圍內）。
• 搭配諾霸任意傳感器使用，均為5位分辨率。
• 10.1″多觸點觸摸屏配合屏顯係統圖標，可輕鬆便捷的完成工具指引與選擇。
• Gorilla®玻璃自帶抗性，有助防止屏幕表面出現深划痕及碎屑。
• 雙傳感器端口可同時執行2個任務，如：曲線及檢測。
• 雙任務窗口可同時工作！ （如在繪製週期圖時針對目標進行測量，同時從兩個傳感器獲取讀數，同時捕獲兩個不同的圖表或在捕獲時管理和查看讀數）。
• T-Box™ 2可捕捉到最高325 Hz的圖形，可分析快速移動的瞬間數據。
• 用戶可自行配置選擇扭力，扭力和角度，速度目標以及設置閾值的能力。
• 可預定義多個目標。
• 2個USB接口，1個RS-232串口及2個可獨立配置的輔助端口。
• 6種扭矩工具檢測模式：軌跡，音響，錶盤&數顯，失速，起子及 油壓。
• 用於內部存儲及USB管理的文件瀏覽器/管理器方便用戶更簡便靈活的管理多個文件及文件夾。
• 可將讀數和圖表導出為CSV和JSON格式，允許第三方軟體集成。
• 可通過USB適配器聯網。
• 通過RS-232或USB虛擬串行設備可以每秒最多100個讀值的速度從每個端口進行連續輸出。
• 快速CPU頻率可高達2.3GHz。
• 120G SSD大容量硬盤存儲。
• 4GB RAM實現流暢無縫操作。
• 台式支架作為標配件提供，可調節視角。
• 後面板設有100 mm x 100 mm VESA安裝孔，方便壁掛安裝或使用第三方支架/力臂。
• 可遠程更新軟件，無需送返諾霸。
• 可連接鍵盤及鼠標使用（另行購買）。
• 提供全新軟體版本1.0.2.X。
• 可對全新圖表進行預設及默認值設置，節約用戶時間。
• 新圖表設置可設定圖表最長持續時間，以便在設定時間後停止數據抓取。
• 可鏈接目標並具有刪除之前抓取數據的能力。
• 智慧目標文件歷史記錄可記錄各個AnB模塊所使用的最近文件，在同時使用兩個不同目標設定的傳感器時大幅提升其便利性。
• 啟用或禁用隱藏AnB選項，提升設置或清除AnB模塊內置目標的管控。
• 用戶可打開/關閉每個AnB的串行數據輸出，控制AnB的輸出並保留所需AnB的數據流。
• 漸進式重置可掃描一系列鏈接目標，實現油壓扳手或齒輪箱的快速校準（僅限峰值模式）。
• 勾選廣泛抓取可在相鄰AnB上抓取對應的目標讀值（僅限峰值及音響模式，峰值模式時需啟用漸進式重置功能）。
• 勾選廣泛抓取及漸進式重置功能的連接目標可抓取一系列理想壓力水平下的油壓扳手扭力用於油壓扳手的快速校準，可顯著減少校準時間（如，將數分鐘壓縮至一分鐘以內）。
• 用戶界面中優化性能可比以往更流暢抓取大量讀值。
• 簡便的更新程序，在T-Box™ 2用戶界面即可更新，無需使用鍵盤。

T-Box™ 2-Function Introduction

The T-Box™ 2 utilises its powerful processor to provide a seamless and complete torque data collection package. This is capable of tool calibrations, data logging, simultaneous transducer connections and archiving to your PC.

• Features a 10.1″ multi-touch screen display with on-screen graphic icons for simple and easy tool navigation and selection.
• User configurable to allow a selection of torque, torque and angle, rate targets and the ability to set thresholds.
• Two task windows allows simultaneous working! Measure against a target while graphing the cycle, take readings from two transducers simultaneously, capture two different graphs at the same time or manage and review readings s they are captured.
• Ability to network via USB Adapter.
• Continuous output of up to 100 readings per second per port via RS-232 or USB virtual serial device.
• Includes 6 modes for torque tool measurement: Track, Click, Dial & Electronic, Stall, Screwdriver and Hydraulic.
• Can export readings and graphs to CSV and JSON format allowing for 3rd party software integration.
• File browser / manager for internal storage and USB management giving the user greater ease and flexibility in managing multiple files and folders.
• 2 transducer ports gives you the ability to perform two tasks simultaneously e.g. graphing and measuring.
• Fast CPU frequency up to 2.3 GHz.
• Large capacity memory of 120GB SSD storage.
• The T-Box™ 2 can capture graphs up to 325 Hz, offering the ability to analyse fast moving transients.
• 4GB RAM allows for smooth and seamless operation.
• Ability to predefine multiple targets.
• Features hardened and impact resistant glass helping to prevent chips and scratches appearing on the screen’s surface
• Weight: 5.2 Kg.
• Bench stand supplied as standard with an adjustable viewing angle.
• 2 independently configurable ancillary ports
• 1 RS-232 Serial Port.
• 2 USB Ports.
• Accuracy of ±0.05% of reading (±0.1% when below 5% of transducer capacity).
• Rear panel features 100 mm x 100 mm VESA mounting holes, allowing for easy wall mounting or the use of third party stands / arms.

這篇文章 T-Box™ 2 最早出現於 鴻石國際股份有限公司。

扭力工具試驗機 – TTT-功能介紹

• 圖形按鈕便於選擇模式。
• 上下限設定，過低、合格和失效故障指示燈，最多可設置12個目標值。
• 數字極限狀態輸出可用於控制外部工具。
• 使用快速充電內部電池組(最長時間為3小時20分鐘)或交流電源(90至264伏特)。
• 用於連接到印表機或PC的RS-232-C串行數據接口。在軌跡模式使用時連續RS 232輸出(最大每秒11個讀數)。
• 脈沖模式和離合器工具模式下的脈衝計數功能。
• “SMART”智慧傳感器識別,立即顯示傳感器容量、單位和序列號。
• 20個非“SMART” mV/V校準的傳感器的校準數據的存儲。
• 模擬輸出允許儀器作為過程控制系統的一部分進行性能分析。
• 用戶可選擇每個操作模式的頻率響應。
• 所有用戶選擇功能都具有密碼保護，僅向指定用戶提供所需操作模式和啟用計量單位，這一功能有效避免了操作人員的誤操作。
• 峰值模式可設置為自動重置（之前只能手動重置）。
• 系列3用戶可以設置自己的測量單位，可以與非扭力傳感器連接，比如負載或壓力。

TTT料號不含傳感器電線

Torque Tool Testing Machine – TTT-Function Introduction

The TTT shares all of the extensive features of the TST except that it has no internal transducer. Instead, the TTT offers not one but three external transducer interfaces allowing any three transducers to be simultaneously connected. Selection between the transducers is made by a rotary switch at the back of the instrument case. Any transducer from Norbar’s “SMART” range and most mV/V calibrated transducers from Norbar or other manufacturers can be connected to the TTT. The “SMART” feature means that once a transducer has been connected, the instrument will automatically recognise calibration details such as mV/V output, serial number and capacity.

• Pictorial display panel for easy mode selection.
• Pulse count feature in Impulse mode and Clutch Tool mode.
• Memory for calibration details of 20 non-“SMART” mV/V calibrated transducers.
• User selectable frequency response for each mode of operation.
• All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.
• Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
• RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec).
• Analogue output allows the instrument to be used as part of a process control system for example, shutting off a power tool at the desired torque.
• Limit Detection with low, pass and fail indication. Up to 12 target values can be set.
• “SMART” intelligence for transducer recognition. Transducer capacity, Units and Serial No. are shown.
• Peak Memory can now be configured to have auto reset.
• Now possible for users to set up their own measurement units. This make is possible to interface with non torque transducers, for example load or pressure.

這篇文章 扭力工具試驗機 – TTT 最早出現於 鴻石國際股份有限公司。

扭力螺絲起子試驗機 – TST-功能介紹

• 圖形按扭顯示面板便於模式選擇
• 上下限設定，過低、合格和失效故障指示燈，最多可設置8個目標值
• 數字極限狀態輸出可用於控制外部工具
• 使用快速充電內部電池組(最長時間為3小時20分鐘)或交流電源(90至264 伏特)
• 用於連接到印表機或PC的RS-232-C串行數據接口，軌跡模式使用時連續RS232輸出(最大每秒11個讀數)
• 脈沖模式和離合器工具模式下的脈衝計數功能
• “SMART”智慧傳感器識別
• 可存儲20個非“SMART” mV/V校準的傳感器校準數據
• 模擬輸出允許儀器作為過程控制系統的一部分進行性能分析
• 用戶可選擇每種操作模式的頻率響應
• 所有用戶選擇功能都具有密碼保護，僅向指定用戶提供所需操作模式和啟用計量單位，這一功能有效避免了操作人員的誤操作

Torque Screwdriver Testing Machine – TST-Function Introduction

The TST combines simplicity with up to date technology to provide a high quality instrument for the testing and calibration of low capacity torque tools. Featuring an internal transducer complete with Rundown Fixture, the TST is available in 3 torque ranges, 0.04 to 2 N·m, 0.5 to 10 N·m and 1.25 to 25 N·m, and has a system accuracy over its Primary range (±0.5% of reading from 20% to 100% of full scale). What makes the TST genuinely versatile is the interface for an external transducer.

This interface, accessed by a 2 way switch in the TST, allows the connection of any transducer from Norbar’s “SMART” range and most mV/V calibrated transducers from Norbar or other manufacturers. The Series 2 products bring a number of enhancements over the original versions. Most importantly, the increase in display resolution results in a significantly improved instrument accuracy. True analog output and continuous RS 232 makes the instrument suitable for a wide range of process control and monitoring applications.

Product features

• Pictorial display panel for easy mode selection.
• Limit Detection with low, pass and fail indication. Up to 8 target values can be set.
• Pulse count feature in Impulse mode and Clutch Tool mode.
• “SMART” intelligence for transducer recognition.
• Memory for calibration details of 20 non-“SMART” mV/V calibrated transducers.
• User selectable frequency response for each mode of operation.
• All user selectable features have password protection. The instrument can be issued to users with only the required modes of operation and units of measure enabled. This feature can virtually eliminate operator induced errors.
• Operation from fast charge internal battery pack (maximum time of 3 hours 20 minutes for full charge) or a.c. supply (90 to 264 Volts).
• Analogue output allows the instrument to be used as part of a process control system for example, shutting off a power tool at the desired torque.
• RS-232-C serial data interface for connection to a printer or PC. Continuous RS 232 output when used in track mode (up to 11 readings per sec.)
• Guaranteed classification to BS7882:2017, Class 1 or better over the primary calibration range (20% to 100% of full scale), Class 2 or better over the secondary calibration range (lowest calibrated value to 20% of full scale). Class 1 equates to ±0.5% of reading

1. 以上料號不含外部傳感器的傳感器電線。
2. TST提供緩衝器作為連接模擬器。

這篇文章 扭力螺絲起子試驗機 – TST 最早出現於 鴻石國際股份有限公司。

專業型扭力試驗機 Pro-Test 系列 2-功能介紹

• “Pro-Test”的價格使內部測試成為可行的方案，即使對於較小的工業和汽車扭力扳手用戶也是如此。
• 保證符合BS 7882：2017標準, 主要校準範圍1級或更優 (滿量程的20%至100%)，次級校準範圍2級或更優(最低校準值到滿量程的20 %)。 1級相當於精度±5%。
• 三種基本操作模式，滿足所有的扭矩扳手類型要求，“Track”顯示當前值，“Peak Memory”記錄最高值，“First Peak Memory”記錄扭力的第一峰值(音響型扭力扳手)。兩種峰值模式都可以使用手動或自動重置。
• 大背光顯示屏很容易從遠處和光線較暗處看清。
• 顯示器和傳感器用600mm電線連接。
• 包含所有扭力測量的常用單位。
• 圖形按鈕便於模式選擇。
• 用戶可以選擇他們希望使用的語言（包括大多數歐洲語言）。
• 傳感器可按水平或垂直於扭矩扳手的操作方向來固定安裝。
• RS-232–C接口用於讀取印表機、PC、數據捕獲單元、SPC軟件等的輸出。
• 可選的安裝板提供更大的安裝靈活性。
• 所有用戶設置的參數都可從前置面板菜單上選擇。
• 提供耐用的工具箱，附帶連接到PC或印表機的數據傳輸線。
• 所有傳感器經過順時針方向校準。

專業型扭力試驗機 Pro-Test 選配件

Professional Torque Testing Machine Pro-Test Series 2-Function Introduction

Based on the outstanding success of the original Professional Torque Tester and combining the simplicity of the TTT and TST, the Pro-Test Series 2 is offered as the most comprehensive torque wrench tester on the market today.

• Three essential operating modes allow the Pro-Test to be used with all torque wrench types: ‘Track’ displays the live value, ‘Peak Memory’ records the highest value and ‘First Peak Memory’ records the first peak of torque (for click type torque wrenches). Both memory modes can be used with manual or automatic reset.
• Large back lit display is easily visible from a distance and in poor light.
• All common units of torque measurement are included.
• User can select the language they wish to work in (most European languages are included).
• Transducer can be mounted for torque wrench operation in the horizontal or vertical plane.
• RS-232-C is included for the output of reading to a printer, PC, data capture unit, SPC software etc.
• Optional mounting plate, Part Code 62198, allows the Pro-Test to be wall mounted.
• All user settable parameters are menu selectable from the front panel.
• As standard, all transducers are calibrated in a clockwise direction. For additional anti clockwise direction order Part No. PROTEST.CCW.
• Display and Transducer are hard-wired together with a 600mm cable.
• Pictorial ‘Mode’ selection incorporated for ease of use.
• Supplied in a robust plastic case with a data transfer lead to connect to a PC or printer.
• Guaranteed classification to BS7882:2017, Class 1 or better over the primary calibration range (20% to 100% of full scale), Class 2 or better over the secondary calibration range (lowest calibrated value to 20% of full scale). Class 1 equates to ±0.5% of reading.

這篇文章 專業型扭力試驗機 Pro-Test 系列 2 最早出現於 鴻石國際股份有限公司。