油壓扭力扳手測試架 功能介紹

油壓扭力扳手測試架-校準架

Norbar 的液壓工具校準架是一款堅固耐用的設備，可以準確測試液壓扭力扳手。 一個系統包括一個校準夾具和傳感器，還需要一個扭力試驗機和傳感器傳輸線。

• 傳感器使用了軸承來支持，提高了測試的精確度。
• 可換的不銹鋼凹方頭和圓形反作用柱。
• 淬硬鋼的襯套鑲嵌於反作用柱的兩端：適合於大多數的油壓扭力扳手。
• 最優化的零件材料設計使之既堅固耐用又輕便。
• 對六角油壓扳手，有各種各樣的六角轉四方的轉接頭供使用。

校準架規格

80031 / 80030 使用的油壓扭力扳手測試架傳感器

+ UKAS認可的校準最大為6000Nm。 7000Nm的非認可值為根據數據推論得出，僅供參考

80029 / 80030 使用的油壓扭力扳手測試架傳感器

80032 使用的油壓扭力扳手測試架傳感器

油壓扭力扳手測試架-雙校準架

油壓扭力扳手測試架-襯套轉接件

特殊的非標六邊形和方形轉接件可應要求提供。

Norbar’s Hydraulic Tool Calibration Fixture is a robust device that allows accurate testing of hydraulic torque wrenches. A system comprises of a Calibration Fixture and Transducer, also required is a torque measuring instrument and transducer cable.

• Bearing support for transducer gives improved accuracy
• Interchangeable stainless steel square and round reaction posts
• Hardened steel inserts to location reaction posts in two positions: suits most hydraulic wrenches
• Optimised material sections for robust but portable design
• For hexagon link wrenches, a wide range of hexagon to square adaptors are available

這篇文章 油壓扭力扳手測試架 最早出現於 鴻石國際股份有限公司。

動力工具扭力測試架與靜態傳感器結合使用時，該測試台提供了一種具有成本效益的測試和校準 Norbar 的 PTM-52/72、PT-72 和 ET-72 的方法。(動力工具扭力測試架)使用前必須詳讀使用手冊，避免工安意外發生。

注：動力工具扭力測試架中不包含靜態傳感器50669.LOG。標準範圍700 – 7000 N·m沒有覆蓋全部動力扭矩工具範圍，其它校準敬請聯繫鴻石獲得進一步資訊。

• 適用於電動工具測試
• 設計用於模擬螺栓連接的測試夾具
• 自反應系統

動力工具扭力測試架-套筒配件

動力工具扭力測試架-其他配件

動力工具扭力測試架-反作用力板配件

ET/PT Power Tool Test Rig, 7000 N·m

When used in conjunction with a Static Transducer, this test rig provides a cost effective means of testing and calibrating Norbar’s PTM-52/72, PT-72 and ET-72.This calibration fixture is designed to be used with the correct Norbar calibrated static transducer to test inline power tools using the standard Norbar adaptor plates.

• Suitable for Power Tool Testing
• Test fixture designed to simulate a bolted joint
• Self-reacting system

Technical Specifications

• Supplied with 3/4″, 1″ & 1 1/2″ square drive adaptors
• Includes 8 Reaction Plates
• Transducers not included
• Designed for use with suitable display instruments (not included)

SAFETY
Isolate the tool from all energy sources before changing or adjusting the drive square or socket.
There is a risk of crushing between the reaction bar and work piece.
Keep hands away from reaction bar.
Keep hands away from tool output.
Keep loose clothing, hair, etc. from being caught in any rotating part of the tool.
Use only sockets and adaptors which are in good condition and are intended for use with power tools.
Read operating instructions for power tools.
Read operating instructions for transducer and measurement instrument.

這篇文章 動力工具扭力測試架 最早出現於 鴻石國際股份有限公司。

50000N·m航空倍力器測試架-功能介紹

• 廣泛的檢測範圍，除扭力倍力器、非同軸倍力器（如Sweeny航空專用倍力器） 、液壓扭力扳手外，亦可檢測氣動扭力扳手、電動扭力扳手等動力工具。
• 精密結構設計便於輕鬆更換不同量程靜態扭力傳感器。
• 最大檢測範圍為50000Nm。
• 軸承支撐結構提供更精準的測量精度。
• 多點位扭力反作用力臂挂靠模式滿足市面上大部分產品挂靠需求。
• 雙坐標點動操作模式便捷完成設備調試，滿足客戶不同 需求應用。
• 電動控制加載，實現操作零負荷。
• 可滿足正反向檢測需求。
• 電氣安全保護設計確保使用者操作安全。
• 搭配一體機及扭力測試儀，可直接將檢測數據導入電腦進行數據管理。

50000N·m Aviation Multiplier Test Rack-Function Introduction

The Norbar calibration laboratory provides calibration services for many well-known manufacturers. Its capacity expands multiple times. And Norbar develops 50000N.m multiplier equipment according to customers’ requirement.

This Aviation Multiplier Test Rack is designed for the calibration of torque multipliers, non-coaxial multipliers (such as Sweeny aviation multipliers), hydraulic torque wrenches, pneumatic torque wrenches, electric torque wrenches and other power tools.

Its operation mode has double coordinate with jog. Easy to adjust. It also can support all types of torque tools and different range applications. This Aviation Multiplier Test Rack can output the calibration data to PC with the integrated machine and torque tester. Its calibration range is 100 – 50000 N.m.

• Wide range of detection, in addition to torque multiplier, non-coaxial force multiplier (such as Sweeny aviation special multiplier), hydraulic torque wrench, can also detect pneumatic torque wrench, electric torque wrench and other power tools.
• Precise structural design facilitates easy replacement of static torque sensors with different ranges.
• The maximum detection range is 50000Nm.
• The bearing support structure provides more precise measurement accuracy.
• The anchoring mode of the multi-point torque reaction arm meets the anchoring requirements of most products on the market.
• The two-coordinate jogging operation mode facilitates equipment debugging to meet the different needs of customers.
• Electrically controlled loading to achieve zero load operation.
• It can meet the needs of positive and negative detection.
• The electrical safety protection design ensures the user’s safe operation.
• With an all-in-one machine and a torque tester, the test data can be directly imported into the computer for data management.

About Norbar, world leaders in torque equipment

Cutting edge: Norbar’s state-of-the-art factory facilities ensure we provide the very latest design, manufacturing and quality control technology to achieve the highest level of innovation and precision in the field of torque control equipment.

Family values – Descendants of the founder, Bill Brodey, still participate in the business and the company remains every bit as passionate about providing customers with the highest quality products and services as Bill was when manufacturing that first torque wrench.

這篇文章 50000N·m航空倍力器測試架 最早出現於 鴻石國際股份有限公司。

TCS自動加載扭力扳手校準架-功能介紹

• 可檢測最大扭矩值為3000Nm。
• 配合掃碼槍操作，加快工具信息錄入，降低誤操作可能，提升工作效率。
• 搭載諾霸TMS扭力管理系統，滿足日常工具檢測需求，含出具檢測報告功能。
• 或搭配諾霸TMS扭力管理系統 Plus版，獲得校驗、測試、壽命試驗等多種運行模式，並可對接客戶MES系統，擁有更便捷的數據存儲與管理（選配）。

TCS Automatic Loading Torque Wrench Calibration Stand – Introduction:-

• The maximum detectable torque value is 3000Nm.
• Cooperate with the barcode scanning gun to speed up tool information entry, reduce the possibility of misoperation, and improve work efficiency.
• Equipped with Norbar TMS torque management system, it can meet the needs of daily tool testing, including the function of issuing test reports.
• Or it can be used with Norbar TMS Torque Management System Plus version to obtain multiple operation modes such as calibration, test, and life test, and can be connected to the customer’s MES system for more convenient data storage and management (optional).

Torque Management System PLUS Ver. (TMS PLUS Ver.)

Torque Management System PLUS Ver. (TMS PLUS Ver.) is PC software designed with a user friendly interface that will enable certificate generation and data archiving for calibration of all types of torque tools.
This software is function modularization, divided into two categories of manual tool and power tool calibration. Easy to collect the measurement data.

Function Introduction

• Quick login via scan code for tool measurement. Clear division of authority. Easy to collect tool basic information.
• Support Chinese-English bilingual interface, Simplified/Traditional Chinese can be switched freely. Suitable for various countries around the world.
• Supports custom verification specification settings to meet customized needs.
• Support Microsoft SQL Server and ACCESS three-tier database structure, and cooperate with the server to realize the intelligent identification function, which is convenient for customers. MES system docking cooperation.
• The calibration timing function is convenient for counting the calibration time of a single wrench.
• The mass storage function realizes real-time storage of verification data and synchronous transmission to the database background.
• Support verification data export in EXCEL form.
• A variety of statistical analysis indicators are preset to facilitate tool management.
• Customize report format and export PDF document format.
• Store measurement data in real time and synchronous transfer to database for analysis. Prevent data modification.

這篇文章 TCS自動加載扭力扳手校準架 最早出現於 鴻石國際股份有限公司。

扭力扳手校準架-手動

• • 配合T-Box 2及TDMS軟體使用，可確保依循ISO 6789-2:2017進行扭力扳子的校准或測試。
  • 同時符合BS EN 26789:2003及ISO 6789-1:2017規程。
  • 反向反作用平衡系統設計用於支撐扳手重量，將扳手重量對校準系統的影響降至最低。支撐件的浮動性能同時意味著扳手可尋找到其自然水平，而像其他加載裝置那樣受到限制。此類限制會生成寄生力從而影響校準（已申請國際專利）。
  • 超輕合金結構令TWC便於運輸，適合作為移動實驗室來使用。配合FMT、靜態傳感器使用。
  • 雙速齒輪箱設計兼顧速度與控制的平衡，既可快速加載扭力扳手，又可實現精確加載操作。
  • 配合FMT，靜態傳感器，T-Box 2，TST， TTT及Pro-Test使用。
  • 校準時，TWC與扭力扳手的手柄保持固定位置不變。旋轉傳感器確保加載90°施加在扭力扳手手柄上，令其力量直接作用於手柄的加載點。
  • 使用TWC手動扭力扳子校準架時任何傳感器不得使用其低於 5%量程的量程區間範圍。

扭力扳手校準架（TWC）

扭力扳手校準架-自動

• 可依循ISO 6789：2017第一部分及第二部分進行扭力扳子的校准或測試。
• 反向反作用平衡系統設計用於支撐扳手重量，將扳手重量對校準系統的影響降至最低。支撐件的浮動性能同時意味著扳手可尋找到其自然水平，而像其他加載裝置那樣受到限制。此類限制會生成寄生力從而影響校準（已申請國際專利）。
• 超輕合金結構令TWC便於運輸，適合作為移動實驗室來使用。配合FMT、靜態傳感器使用。
• 校準時，TWC與扭力扳手的手柄保持固定位置不變。旋轉傳感器確保加載90°施加在扭力扳手手柄上，令其力量直接作用於手柄的加載點。
• 提供強大而便捷的觸摸屏用戶UI界面（如有需求，亦可連接鍵盤與鼠標）。
• 靈活的工具模塊系統，依據類型、ISO分類及支持單位、扭力範圍等完成自定義模板。客戶可根據自身需求完成校準工作流程的編程設定，並將模板套用在註冊工具上進行校準。每個模板均可進行校準編程設定，可依據ISO標準流程進行預設，便於工具完成快速設置。同時也支持非ISO標準校準流程的自定義設定。
• 校準工作管理：預約校準，跟進之前預定的校准進度並重新開始。
• 自動管理非指示工具的校準及一致性工作流程。
• 智慧速率控制系統確保工具快速循環。滿足ISO 6789:2017規程。
• 濕度溫度環境監測滿足校準規程。
• 依據ISO 6789-2:2017校準規程自動管理不確定數據，按照現有工具ISO分類及工作流程，使用動態指令指導客戶完成整個流程。
• 自帶數據分析及證書生成模塊，從校準/一致性過程到生成校准證書無縫銜接，無需第三方軟件。
• 海量內置存儲空間滿足數年正常使用校準數據儲存。
• TWC控制盒擁有UKSA認可校准證書。 （諾霸是世上少數幾家可為設備及扭力傳感器頒發UKAS認可校准證書的製造商之一）因此，客戶可在保持完整追溯性的前提下交換設備及傳感器組合。
• 使用TWC自動扭力扳子校準架時任何傳感器不得使用其低於 5%量程的量程區間範圍。

扭力扳手校準架-配件

• 60322快速拆卸組件可進一步簡化並提升校準實驗室效率。
• 60324六角轉接組件配合TWC手動扭力扳子校準架使用，通過內部解決方案的實施，提升用戶工作流程速度，從而將扳手快速挂靠至反應點。
• 60330偏置角板組件在校準頭部固定扭力扳手時具有更大的靈活性。

Torque Wrench Calibration Stand-Manual-Function Introduction

The Norbar Torque Wrench Calibrator is designed to perform accurate calibrations of Click, Cam, Dial and Electronic torque wrench designs in accordance to ISO 6789:2017 The part number for the this Torque Wrench Calibrator has changed from 60314 to 60332

• Two speed gearbox designed for a sufficient balance of speed and control which allows for both fast loading of the torque wrench and a slower more precise loading
• During calibration, the TWC maintains a fixed position on the handle of the torque wrench
• Rotating transducer design ensures that the load is applied 90° to the torque wrench handle. The benefit of this precise alignment is that forces are applied squarely to the load point of the handle
• Lightweight alloy construction ensures the TWC is easily transported, making it well suited for mobile laboratory applications
• Can produce certification to ISO 6789-2:2017 when used with T-Box XL™ software version 3.0.0.X and TDMS version 4.0.X
• Counterbalance reaction is designed to support the weight of the wrench so that the weight does not become a parasitic force within the calibration system. The floating nature of the support means that the wrench is able to find its own natural level rather than being constrained as in many other loading devices. Any such constraint will be a parasitic force within the system (Patents apply)
• Compatible transducers include Flange Mounted Transducers, Static Transducers (when using part number: 60318) and Pro-Test (when using part number: 60323)

Torque Wrench Calibration Stand-Automatic-Function Introduction

The Norbar Torque Wrench Calibrator is designed to perform accurate calibrations of Click, Cam, Dial and Electronic torque wrench designs in accordance to ISO 6789:2017

• During calibration, the TWC maintains a fixed position on the handle of the torque wrench
• Rotating transducer design ensures that the load is applied 90° to the torque wrench handle. The benefit of this precise alignment is that forces are applied squarely to the load point of the handle
• Supplied with a powerful yet simple touchscreen User Interface (UI) (keyboard and mouse also supported if desired)
• Flexible tool template system; minimises number of templates required to cover a wide range of tools, aiding efficient use
• Programmable calibration workflow for each template, can be pre-set to ISO compliant flow for the given tool for a faster set-up or can also support bespoke non-ISO compliant workflows
• Calibration job management; book calibrations, track progress of previous bookings and resume them
• Automated management of calibration and conformance workflows for non-indicating tools
• Intelligent rate control system ensures fast cycling of tools while maintaining compliance with 2017 standards
• Environmental monitoring (humidity/temperature) to ensure compliance with calibration standards
• Automated management of uncertainty data for ISO 6789-2:2017 calibrations, guiding the user through the process using dynamically generated instructions based on the current tool’s ISO classification and workflow
• Inbuilt data analysis and certification generation seamlessly move from calibration/conformance procedure to certificate generation, no third-party software required
• A substantial amount of inbuilt storage allowing for years’ worth of calibration data through normal use
• Lightweight alloy construction ensures the TWC is easily transported, making it well suited for mobile laboratory applications
• Counterbalance reaction is designed to support the weight of the wrench so that the weight does not become a parasitic force within the calibration system. The floating nature of the support means that the wrench is able to find its own natural level rather than being constrained as in many other loading devices. Any such constraint will be a parasitic force within the system (Patents apply)

這篇文章 TWC扭力扳手校準架 最早出現於 鴻石國際股份有限公司。

ISO 3000 扭力扳手校準架-功能介紹

• 1250:1的高傳動比齒輪箱可輕鬆施加大扭力。
• 配合T-Box™ 2使用，計時功能令扭力施加比率符合ISO 6789:2017的要求。
• 該扭力扳手校準架可使用諾霸靜態傳感器系統輕鬆更換傳感器。
• 浮動反作用力點可最大限度的減少扳手的側向載荷。滿足ISO 6789:2017要求將被測扳手寄生力降至最低的規程。
• 配合反作用力臂延長桿可檢測2200mm的扳手。可移除以節約空間。在未安裝反作用力臂延長桿的情況下，扳手可檢測長度最長為1100mm。

*另有手動測試架 ISO 1500N.m提供，料號60300。

ISO 3000 Torque Wrench Calibration Stand – Function Introduction

These loaders allow torque wrenches to be calibrated or tested in accordance with ISO 6789:2003, BS EN 26789:2003. Their function is to take full advantage of the accuracy of Norbar’s torque measuring systems by reducing operator induced variations in the calibration process.

• The design allows for easy interchange of transducers using the Norbar Static Transducer system
• Floating reaction point minimises side loads on wrench.
• Optional Small Reaction Plate (Part Code 20606) allows torque wrenches down to 125mm in length to be tested.
• The high ratio, 1250:1 gearbox allows high torques to be applied, whilst ensuring that the operator does not exceed the rate of increase of torque specified in the standards.
• Reaction extension bar allows wrenches up to 2250 mm to be tested. This can be removed to save space.
• Includes a selection of adapters to enable torque wrenches to be calibrated with an appropriate transducer.

INTRODUCTION

The Norbar ISO 3000 Torque Wrench Loader is designed to test torque wrenches up to a maximum capacity
of 3000 N∙m or 2200 lbf∙ft.
To measure the applied torque a torque transducer coupled to an appropriate measurement instrument are
required.

Safety Precautions

• The ISO 3000 is heavy. Take care when installing.
• Ensure the operating area is capable of taking the weight of the ISO 3000.
• Trapping hazard – Keep hand and loose clothing away from the torque wrench during use.
• To avoid damage to the torque wrench under test do not exceed the wrench set torque value.
• To avoid damage to the transducer do not exceed the maximum capacity.
• Never exceed the maximum torque capacity of the ISO 3000 (3000 N∙m / 2200 lbf∙ft).
• Do not operate without a torque measurement system connected and working.
• The ISO 3000 is designed for testing torque tools, do not use for other purposes.

這篇文章 ISO 3000 扭力扳手校準架 最早出現於 鴻石國際股份有限公司。

油壓扭力扳手檢測車-功能介紹

• • 可輕鬆更換不同扭力傳感器，扭力量程範圍可達到100N·m-50000N·m。
  • 傳感器使用了軸承來支撐，提高了測試精度。
  • 反作用柱可根據實際情況進行挂靠點的更換。
  • 對六角油壓扭力扳手，有各種各樣的六角轉四方的轉接頭供使用。
  • 行走輪自帶鎖定裝置。可輕鬆移動檢測小車，實現現場實時檢測。
  • 配合一體機與扭力測試儀，可直接將檢測數據輸入電腦。

油壓扭力扳手檢測車 -產品規格

油壓扭力扳手檢測車 -選配方案

Hydraulic Wrench Calibration Trolley – Introduction

Norbar launch Hydraulic Wrench Calibration Trolley for customer’s on-site measuring of hydraulic wrench.
Norbar hydraulic wrench calibration trolley is designed with walking wheels for on-site measuring.The trolley also supplies large measuring range with different range transducers.

Hydraulic Wrench Calibration Trolley – Key Features

• Easy to replace transducers.
• Measuring torque range is 100N.m-50000N.m.
• Use bearing to support the transducer for higher measuring accuracy.
• Replace reaction point by reactiong cylinder in actual situation.
• Different adapters (hexagon to square) for hexagon hydraulic wrench.
• Walking wheels with auto lock feature.
• Move the trolley for on-site measuring on time easily.
• Use integrated computer to save data with torque testers.

About Norbar, world leaders in torque equipment

Cutting edge: Norbar’s state-of-the-art factory facilities ensure we provide the very latest design, manufacturing and quality control technology to achieve the highest level of innovation and precision in the field of torque control equipment.

Family values – Descendants of the founder, Bill Brodey, still participate in the business and the company remains every bit as passionate about providing customers with the highest quality products and services as Bill was when manufacturing that first torque wrench.

Globally available: Norbar is the only torque equipment manufacturer to be able to offer torque tool and instrument calibration services to the original factory standard on four continents.

這篇文章 油壓扭力扳手檢測車 最早出現於 鴻石國際股份有限公司。