超聲波螺栓緊固應力測試儀Delta Sigma擁有全新的人機交互介面，實現螺栓拉伸和負荷資料的測量、顯示、存儲及傳輸。對於螺栓拉伸可實現精准控制。
其檢測原理類似於聲納。超聲波測量螺栓拉伸是通過對緊固件的一端使用音速脈衝來正確測量衝擊時回音從另一段返回的時間。

超聲波螺栓緊固應力測試儀Delta Sigma – 功能介紹

• 超高性價比的超聲波螺栓拉伸及負荷測量設備
• 方便易用的觸控式螢幕，支援手套或手寫筆一同使用
• IP44防護等級，滿足現場使用需求
• 相容 MS Windows及MS Excel，無需其他電腦軟體
• 套裝內已包含溫度探頭，免去手動輸入溫度步驟
• 可通過micro-USB或外接電源適配器進行供電

Ultrasonic Bolt Measurement Delta Sigma

The Delta Sigma pulse-echo ultrasonic time-of-flight (TOF) measurement device; measures, displays, stores and transfers bolt load and elongation data in a new, single purpose unit.

Functions:-

• Low cost ultrasonic bolt elongation and load measuring instrument
• Easy to use touch screen display (can be used with gloves or stylus)
• IP44 rated (sealed for field use)
• Compatible with MS Windows and MS Excel, no need for special PC software
• Temperature probe is included in kit, no need for manual temperature input
• Chargeable instrument by external charger or micro-USB

About Norbar, world leaders in torque equipment

超聲波螺栓緊固應力測試儀Delta Sigma – 產品規格

DELTA SIGMA 套裝

DELTA SIGMA 套裝 – 選配件

DELTA SIGMA 套裝 – 感測器選配件

這篇文章 超聲波螺栓緊固應力測試儀Delta Sigma 最早出現於 鴻石國際股份有限公司。

TruCheck™ 2 & TruCheck™ 2 Plus 功能介紹

• 依據客戶策略監測扭力扳手性能，確保扳手處於巔峰狀態。
• LCD顯示螢幕依據顏色變化顯示清晰的目標指示（Plus版本獨有）。在昏暗區域依舊清晰可見提供雙版本，TruCheck™ 2及TruCheck™ 2 Plus。
• TruCheck™ 2可設置選項極少，便於非專業用戶檢測音響型扭力扳手。
• TruCheck™ 2 Plus可設定扭矩單位，三種操作模式選擇（音響，錶盤及軌跡），最多可存儲15種目標值，12種語言選擇。
• TruCheck™ 2 Plus用戶可設定目標值及公差。
• 讀值精度：±1% （10Nm及1100NmTruCheck™ 2型號的10%量程以下時為±2%）。
• 內置Micro USB 2.0接口實現USB充電。 TruCheck™ 2 Plus支持同時充電及數據傳輸。
• 出廠附順時針方向可溯源校准證書。
• 可遠端升級軟體，無需送返諾霸。

TruCheck™ 2 is a cost effective torque wrench checker that has been redesigned to incorporate improved features whilst maintaining ease of use.
The TruCheck™ 2 aims to cut the cost of purchasing a torque wrench checking system and remove the reservations over the complexity of using such equipment.

TruCheck™ 2 features:-  ( 0.1 – 30 N.m & 3 – 2,100N.m) 

• Allows torque tool performance to be monitored and tools kept in peak condition.
• Allows a selection of torque units, three modes of operation (Click, Dial and Track), the ability to store up to 15 targets and select from 12 languages
• Allows operator to set a target value and tolerance
• Inbuilt Micro USB 2.0 port enables power from any USB power source. Plus versions allows for both power and data transfer simultaneously
• If you order a UKAS accredited calibration certificate (available at extra cost) this certificate will be provided in place of the traceable calibration certificate
• Software can be updated remotely, without the need to return the product to Norbar
• Supplied with traceable calibration certificate in clockwise direction. A counter-clockwise calibration is available at additional cost
• Accuracy: ±1% reading accuracy (±2% when below 10% of range for the 10 N·m TruCheck™ 2 model & the 1,100 N·m TruCheck™ 2 model)
• Display: LCD Display
• Auto Reset Hold Time: 1,2 or 3 seconds
• Power Consumption: 0.5W
• Environment: IP 40
• Electromagnetic Compatibility (EMC) Directive: Designed to comply with EN 61326-1

Power Tool Test Fixture for use with TruCheck 2:-

The Power Tool Test Fixture for TruCheck 2 is a simple, robust device that allows non-impacting power tools up to 2,100 N·m to be tested. The universal torque reaction arrangement will suit reaction arms supplied as standard with most Norbar and other pneumatic, electric and cordless torque tools. A complete system comprises the Test Fixture 80033 along with one of the TruCheck 2 Plus models, either 1,100 N·m (part number 43531) or 2,100 N·m (part number 43533) which must be ordered separately.

Does not include:
– EvoTorque® Battery Tool
– TruCheck™ 2

TruCheck™ 2 & TruCheck™ 2 Plus 產品規格

0.1 – 30 N·m

* 43514，43515，43516及43517帶1∕4″凸六角及1∕4″凹方頭
+ 43518及43519帶10 mm凸六角，1∕4″ 及 3∕8″凹方頭

3 – 2,100 N·m

* 43520及43521帶3/8″凹方頭
+ 43522，43523，43524及43525帶1/2″凹方頭
@ 43528， 43529， 43530及43531帶27 mm凸六角及4/8″凹方頭
^ 43532及43533帶27 mm凸六角及1″凹方頭

扭力測試儀備件

TruCheck™ 2 動力工具測試夾具套組是一個簡便而牢固的設備，可用於最高2100Nm的非衝擊動力工具的檢測。

整個檢測系統由測試夾具及TruCheck™ 2 Plus（另行訂購）組成，可選1100Nm或2100Nm型號，具體取決於所需扭矩量程。通用扭矩反作用裝置適用於絕大多數諾霸和其他品牌的氣動、電動、無線扭力扳手的反作用力臂。

備註：此測試夾具套組不適用於TruCheck™初代產品。

這篇文章 TruCheck™ 2 & TruCheck™ 2 Plus 最早出現於 鴻石國際股份有限公司。

油壓扭力扳手測試架 功能介紹

油壓扭力扳手測試架-校準架

Norbar 的液壓工具校準架是一款堅固耐用的設備，可以準確測試液壓扭力扳手。 一個系統包括一個校準夾具和傳感器，還需要一個扭力試驗機和傳感器傳輸線。

• 傳感器使用了軸承來支持，提高了測試的精確度。
• 可換的不銹鋼凹方頭和圓形反作用柱。
• 淬硬鋼的襯套鑲嵌於反作用柱的兩端：適合於大多數的油壓扭力扳手。
• 最優化的零件材料設計使之既堅固耐用又輕便。
• 對六角油壓扳手，有各種各樣的六角轉四方的轉接頭供使用。

校準架規格

80031 / 80030 使用的油壓扭力扳手測試架傳感器

+ UKAS認可的校準最大為6000Nm。 7000Nm的非認可值為根據數據推論得出，僅供參考

80029 / 80030 使用的油壓扭力扳手測試架傳感器

80032 使用的油壓扭力扳手測試架傳感器

油壓扭力扳手測試架-雙校準架

油壓扭力扳手測試架-襯套轉接件

特殊的非標六邊形和方形轉接件可應要求提供。

Norbar’s Hydraulic Tool Calibration Fixture is a robust device that allows accurate testing of hydraulic torque wrenches. A system comprises of a Calibration Fixture and Transducer, also required is a torque measuring instrument and transducer cable.

• Bearing support for transducer gives improved accuracy
• Interchangeable stainless steel square and round reaction posts
• Hardened steel inserts to location reaction posts in two positions: suits most hydraulic wrenches
• Optimised material sections for robust but portable design
• For hexagon link wrenches, a wide range of hexagon to square adaptors are available

這篇文章 油壓扭力扳手測試架 最早出現於 鴻石國際股份有限公司。

動力工具扭力測試架與靜態傳感器結合使用時，該測試台提供了一種具有成本效益的測試和校準 Norbar 的 PTM-52/72、PT-72 和 ET-72 的方法。(動力工具扭力測試架)使用前必須詳讀使用手冊，避免工安意外發生。

注：動力工具扭力測試架中不包含靜態傳感器50669.LOG。標準範圍700 – 7000 N·m沒有覆蓋全部動力扭矩工具範圍，其它校準敬請聯繫鴻石獲得進一步資訊。

• 適用於電動工具測試
• 設計用於模擬螺栓連接的測試夾具
• 自反應系統

動力工具扭力測試架-套筒配件

動力工具扭力測試架-其他配件

動力工具扭力測試架-反作用力板配件

ET/PT Power Tool Test Rig, 7000 N·m

When used in conjunction with a Static Transducer, this test rig provides a cost effective means of testing and calibrating Norbar’s PTM-52/72, PT-72 and ET-72.This calibration fixture is designed to be used with the correct Norbar calibrated static transducer to test inline power tools using the standard Norbar adaptor plates.

• Suitable for Power Tool Testing
• Test fixture designed to simulate a bolted joint
• Self-reacting system

Technical Specifications

• Supplied with 3/4″, 1″ & 1 1/2″ square drive adaptors
• Includes 8 Reaction Plates
• Transducers not included
• Designed for use with suitable display instruments (not included)

SAFETY
Isolate the tool from all energy sources before changing or adjusting the drive square or socket.
There is a risk of crushing between the reaction bar and work piece.
Keep hands away from reaction bar.
Keep hands away from tool output.
Keep loose clothing, hair, etc. from being caught in any rotating part of the tool.
Use only sockets and adaptors which are in good condition and are intended for use with power tools.
Read operating instructions for power tools.
Read operating instructions for transducer and measurement instrument.

這篇文章 動力工具扭力測試架 最早出現於 鴻石國際股份有限公司。

扭力測試儀配件-緩衝器-功能介紹

扭力測試儀配件 專為與法蘭安裝傳感器(FMT)一起使用而設計。適用於各種電動工具，包括氣動/電動螺絲刀和帶離合器或失速扭矩控制的角扳手。

緩衝器配件組

傳感器傳輸線

• 如果訂購一個靜態、環狀或旋轉傳感器，你也需要訂購相應的傳輸線(見規格表)。
• 為了符合最新的校準標準，大多數新的傳感器傳輸線將有一個後綴表示長度，單位厘米。

其他長度訂購需支付額外費用。

備註：

1. 因傳輸線長度增加後對校準結果有影響，故系統需要與增加長度後的傳輸線一起校準。
2. TST、TTT及T-Box™ 2傳輸線最大的允許長度是15m。

數據傳輸線

該套件使 Norbar Pro-Test、TST 和 TTT 儀器能夠連接到大多數 PC 和 RS232 印表機。

備註：此數據傳輸線套裝不適用於HE及TruCheck設備

此數據線套裝可用於諾霸“CE標誌”設備（1996年1月後的ETS，TWA及DTS及所有Pro-Test，TST及TTT）與絕大多數電腦的連接。

扭力測試儀配件-儀器配件

TTT料號不含傳感器電線。

Torque Tester Accessories – Buffer – Function Introduction

• Suitable for a wide variety of power tools including pneumatic/electric screwdriver and angle wrenches with either clutch or stall torque control.
• Supplied with the FMT2 as standard, but can also be purchased separately.

Data transmission line – function introduction

• A suffix after the part number indicates the length of the lead in cm, thus XXXXX.200 = 2 metres. If transducer leads are required of a non-standard length (to the nearest metre),the new suffix must be added to the part number when ordering.
• For Harsh Environment (HE) transducers and the TTL-HE display instrument, contact Norbar for information on Transducer Leads.

這篇文章 扭力測試儀配件 最早出現於 鴻石國際股份有限公司。

STPC智慧螺絲鎖附系統-功能介紹

• 防錯防漏功能：配合諾霸工具使用，大幅減少人為錯誤發生機率。
• 配合諾霸無線傳輸工具(EBT)，支持數據無線傳輸存儲。
• 強大的用戶管理功能，支持IC卡登錄系統，可以設置不同權限等級的用戶。
• 支持多國語言操作。
• 諾霸STPC智慧螺絲鎖附系統流程操作提示配合可視化操作指引，減少員工培訓次數，有效排除人為因素導致的錯誤可能。
• 通過Barcode及ID號碼信息，可順序定位該Barcode及ID碼所對應工件的锁附狀態（OK、NG、扭力、角度、時間）等信息。通過Barcode/RFID查詢可以獲取對應锁附工件上的錯誤或漏擰信息。
• 使用與維護方便快捷。
• 多項設置功能：工具設置、操作人員設置、密碼更改設置、工作組次設置等。
• 扳手锁附數據查詢，根據所選擇锁附序號，所查詢锁附結果自動生成相關的锁附曲線及CP、CPK值。
• 軟體可實現锁附控制器控制管理。
• 對锁附工具的使用次數，距標定時間，距保養時間等數據進行採集並統計，實現故障趨勢報警要求。
• 使用諾霸STPC智慧螺絲鎖附系統進行工藝管控，無需控制盒，直接連接PC，實現實時指令操作與情況回饋，完美勝任產線控制、工作站通訊等諸多工藝要求。

STPC Smart Screw Locking System – Function Introduction

• Error-proof and leak-proof function: use with Norbar tools to greatly reduce the probability of human error.
• With the wireless transmission tool (EBT), it supports wireless data transmission and storage.
• Powerful user management function, supports IC card login system, and can set users with different authority levels.
• Support multi-language operation.
• STPC smart screw locking system process operation prompts combined with visual operation guidelines reduce the number of staff training times and effectively eliminate the possibility of errors caused by human factors.
• Through the Barcode and ID number information, the locking status (OK, NG, torque, angle, time) and other information of the workpiece corresponding to the Barcode and ID code can be sequentially located. Through the Barcode/RFID query, the error or missing screw information on the corresponding locked workpiece can be obtained.
• Easy to use and maintain.
• Multiple setting functions: tool setting, operator setting, password change setting, working group setting, etc.
• Wrench locking data query, according to the selected locking serial number, the query locking result automatically generates the relevant locking curve and CP, CPK value.
• The software can realize the control and management of the locking controller.
• Collect and count data such as the number of times the locking tool is used, the time from calibration, and the time from maintenance, so as to realize the alarm requirements for fault trends.
• The STPC smart screw locking system is used for process control, without the need for a control box, directly connected to the PC to realize real-time command operation and status feedback, and is perfectly capable of many process requirements such as production line control and workstation communication.

這篇文章 STPC智慧螺絲鎖附系統 最早出現於 鴻石國際股份有限公司。

智慧動力扭力工具檢測台車-功能介紹

• 滿足多個量程範圍的手動扭力扳手、動力工具的檢測需求。
• 精度±1%。
• 檢測工具範圍覆蓋手動扭力扳手、電動工具、離合器工具以及油壓脈衝工具。
• 手輪加載機構，可靈活調整加載位置，檢測手動扳手時加載平緩，穩定可靠。
• 對數據進行統計分析，滿足基本測量統計，Cm、Cmk等的分析能力。
• 實現動力工具軟硬連接檢測ISO 5393以及VDI/VDE 2647的要求。
• 檢測效率高，檢測完成後一鍵存儲報告並上傳至MES系統。
• 採用油壓/電磁剎車系統，真實模擬客戶螺栓轉動連接環境，精確檢測扳手使用狀況。

• Meet the detection requirements of manual torque wrenches and power tools with multiple ranges.
• Accuracy ±1%.
• The range of testing tools covers manual torque wrenches, electric tools, clutch tools and oil pressure pulse tools.
• The handwheel loading mechanism can flexibly adjust the loading position, and the loading is smooth, stable and reliable when detecting the manual wrench.
• Perform statistical analysis on the data to meet the analysis capabilities of basic measurement statistics, Cm, Cmk, etc.
• Meet the requirements of ISO 5393 and VDI/VDE 2647 for soft and hard connection testing of power tools.
• The detection efficiency is high. After the detection is completed, the report is stored with one click and uploaded to the MES system.
• The oil pressure/electromagnetic brake system is adopted to truly simulate the customer’s bolt rotation connection environment and accurately detect the use of the wrench.

這篇文章 智慧動力扭力工具檢測台車 最早出現於 鴻石國際股份有限公司。

智慧扭力工具檢測車-功能介紹

• 頭部作動加載模式配合全自動變速馬達，通過TMS扭力管理系統 Plus版軟件實現全自動智慧扳手校驗。
• 實時通訊功能，智慧數據管理與追溯。
• 最大靜態檢測值可達1500Nm。最大動態檢測值可達1000N·m。
• 多扭力單位選擇，滿足不同使用需求。
• 設有超載保護及安全保護機構，確保使用安全。
• 可直接將檢測數據傳入系統，自動儲存，實現扭力工具管理、檢測數據處理、CP/CPK、分析、檢測報告自動生成等功能。
• 軟件模塊化設計，涵蓋常用手動及動力工具類型，滿足客戶不同檢測需求。
• 預設多種統計分析指標，便於工具管理。
• 無縫對接客戶MES系統，實現數據智慧統籌管理。
• 內置電源，支持8小時以上持續工作。
• 工作檯面尺寸（mm）：1000*550*900。
• 整體尺寸（mm）：1820*550*1470。

Automatic Intelligent Torque Tools Trolley – Introduction:-

Global exclusive mobile automatic intelligent torque tools trolley which is designed in according with ISO 6789: 2017. Suitable for pipeline measurement at any time. Great reduce measurement costs.
Design for the measurement of small torque power tools and manual torque wrenches. (manual torque wrenches: 1-1500N.m, power tools: 1-700N.m)
The fully automatic loading device loads / unloads torque through a servo motor. The two-stage automatic loading speed is designed to meet the minimum time requirement (between 0.5 s and 2.0 s) for the torque from the 80% target value to the target value according to the ISO6789: 2017-1.
The automatic intelligent torque tools trolley is equipped with a touch screen PC and measurement software, which can identify tools, operators and various information. The software can upload and store measurement data in real time. Set the loading times according to the requirements of ISO6789: 2017-1(Type I and Type II is 5 times, Type III is 10 times) via the software.

Functions:-

• Accuracy: ±0.5%.
• Head automatic / semi-automatic load mode. Intelligent wrench measurement through TMS PLUS Ver. software. Suitable for pipeline measurement at any time in according with ISO6789.
• Easy to get the tool information via scan code for measurement.
• Real-time communication function. Intelligent data management and traceability
• Max static measurement torque value: 1500N.m. Max dynamic measurement torque value: 700N.m.
• Multiple torque unit selection to meet different requirements.
• Overload and safety protection mechanism to ensure use safety.
• Transfer measurement data to the system directly and store automatically. Manage the torque tools with measurement data. CMK / CPK analysis. Generate measurement report automatically and so on.
• Module design software. Cover the common types of manual and power tools to meet customer’s different measurement requirements.
• Customize measurement factors such as measurement times. Generate custom reports.
• Intelligent management torque tools. Set tool’s measurement period and remind via software.
• Optional MES system module. Direct store measurement data in the server for intelligent data management.
  Connect analog bolts and transducers through a fixed ring to measure power tools.
• The reaction arm hangs on the tool trolley during large torque measurement for self-balance.

智慧扭力工具檢測車 – 料號

智慧扭力工具檢測車 – 配件

可選配傳感器

可選配緩衝器

這篇文章 智慧扭力工具檢測車 最早出現於 鴻石國際股份有限公司。

50000N·m航空倍力器測試架-功能介紹

• 廣泛的檢測範圍，除扭力倍力器、非同軸倍力器（如Sweeny航空專用倍力器） 、液壓扭力扳手外，亦可檢測氣動扭力扳手、電動扭力扳手等動力工具。
• 精密結構設計便於輕鬆更換不同量程靜態扭力傳感器。
• 最大檢測範圍為50000Nm。
• 軸承支撐結構提供更精準的測量精度。
• 多點位扭力反作用力臂挂靠模式滿足市面上大部分產品挂靠需求。
• 雙坐標點動操作模式便捷完成設備調試，滿足客戶不同 需求應用。
• 電動控制加載，實現操作零負荷。
• 可滿足正反向檢測需求。
• 電氣安全保護設計確保使用者操作安全。
• 搭配一體機及扭力測試儀，可直接將檢測數據導入電腦進行數據管理。

50000N·m Aviation Multiplier Test Rack-Function Introduction

The Norbar calibration laboratory provides calibration services for many well-known manufacturers. Its capacity expands multiple times. And Norbar develops 50000N.m multiplier equipment according to customers’ requirement.

This Aviation Multiplier Test Rack is designed for the calibration of torque multipliers, non-coaxial multipliers (such as Sweeny aviation multipliers), hydraulic torque wrenches, pneumatic torque wrenches, electric torque wrenches and other power tools.

Its operation mode has double coordinate with jog. Easy to adjust. It also can support all types of torque tools and different range applications. This Aviation Multiplier Test Rack can output the calibration data to PC with the integrated machine and torque tester. Its calibration range is 100 – 50000 N.m.

• Wide range of detection, in addition to torque multiplier, non-coaxial force multiplier (such as Sweeny aviation special multiplier), hydraulic torque wrench, can also detect pneumatic torque wrench, electric torque wrench and other power tools.
• Precise structural design facilitates easy replacement of static torque sensors with different ranges.
• The maximum detection range is 50000Nm.
• The bearing support structure provides more precise measurement accuracy.
• The anchoring mode of the multi-point torque reaction arm meets the anchoring requirements of most products on the market.
• The two-coordinate jogging operation mode facilitates equipment debugging to meet the different needs of customers.
• Electrically controlled loading to achieve zero load operation.
• It can meet the needs of positive and negative detection.
• The electrical safety protection design ensures the user’s safe operation.
• With an all-in-one machine and a torque tester, the test data can be directly imported into the computer for data management.

About Norbar, world leaders in torque equipment

Cutting edge: Norbar’s state-of-the-art factory facilities ensure we provide the very latest design, manufacturing and quality control technology to achieve the highest level of innovation and precision in the field of torque control equipment.

Family values – Descendants of the founder, Bill Brodey, still participate in the business and the company remains every bit as passionate about providing customers with the highest quality products and services as Bill was when manufacturing that first torque wrench.

這篇文章 50000N·m航空倍力器測試架 最早出現於 鴻石國際股份有限公司。

TMS PLUS 扭力管理系統-功能介紹

• ID登錄系統，清晰劃分權限。
• 支持中英雙語界面，簡體/繁體中文自由切換。
• 軟体功能模塊化，分為手動工具及動力工具兩大類校驗。
• 預設ISO和JJG標準校驗規範流程，涵蓋常用手動工具及動力工具類型，方便客戶完成工具日常檢測校驗工作。
• 支持自定義校驗規範設置，滿足定制化需求。
• 支持Microsoft SQL Server和ACCESS三層數據庫結構，配合服務器實現智慧識別功能，方便與客戶。 MES系統對接配合。
• 可設置扳手校驗週期，臨期前自動提醒，確保扳手使用精度。
• 校驗計時功能，方便統計單只扳手校驗時長。
• 海量儲存功能，實現校驗數據的實時存儲，同步傳輸至數據庫後台。
• 支持校驗數據以EXCEL表格形式導出。
• 預設多種統計分析指標，便於工具管理。
• 自定義報告格式並導出PDF文檔格式。

Torque Management System PLUS Ver. (TMS PLUS Ver.)

Torque Management System PLUS Ver. (TMS PLUS Ver.) is PC software designed with a user friendly interface that will enable certificate generation and data archiving for calibration of all types of torque tools.
This software is function modularization, divided into two categories of manual tool and power tool calibration. Easy to collect the measurement data.

Function Introduction

• Quick login via scan code for tool measurement. Clear division of authority. Easy to collect tool basic information.
• Support Chinese-English bilingual interface, Simplified/Traditional Chinese can be switched freely. Suitable for various countries around the world.
• Software function modularization, divided into two categories of manual tool and power tool calibration. Increase measurement speed.
• The standard calibration procedure of ISO and JJG standards is preset, covering common types of manual tools and power tools, which is convenient for customers to complete the daily inspection and calibration of tools.
• Supports custom verification specification settings to meet customized needs.
• Support Microsoft SQL Server and ACCESS three-tier database structure, and cooperate with the server to realize the intelligent identification function, which is convenient for customers. MES system docking cooperation.
• The wrench calibration cycle can be set, and it will be automatically reminded before the due date to ensure the accuracy of the wrench.
• The calibration timing function is convenient for counting the calibration time of a single wrench.
• The mass storage function realizes real-time storage of verification data and synchronous transmission to the database background.
• Support verification data export in EXCEL form.
• A variety of statistical analysis indicators are preset to facilitate tool management.
• Customize report format and export PDF document format.
• Open port protocol. Dock customer’s system.
• Store measurement data in real time and synchronous transfer to database for analysis. Prevent data modification.

這篇文章 TMS PLUS 扭力管理系統 最早出現於 鴻石國際股份有限公司。