工具控制器 — 基於TTT – 功能介绍：

工具控制器關閉系統安裝在墻面箱體内，配合Norbar PTM系列外部控制型氣動扭力扳手產品使用。

較之内部控制版本氣動扭力扳手，擁有更大範圍的功能。

Tool Controller, Shut-Off System in Wall Box –  Introduction:-

The Tool Controller shut-off system is supplied in a wall box for ‘External Control’ versions of the Norbar PTM series of tools and can give a much greater range of functionality than is possible on the ‘Internal Control’ version of the tool.

Also available with a printer, see Part No. 60254.

工具控制器 — 基於TTT – 產品參數：

工具控制器

工具控制器傳感器連接綫

*可付費定制其他長度的連接綫。
請聯係鴻石獲得更多資訊。

閥門檢測工具控制器

用於PneuTorque遠端工具的工具控制器。配有環狀扭力和角度感測器及電磁閥組件。

• 10″觸控式螢幕 HMI & PLC安裝在塗漆鋼質外殼中，室內/車間工位使用
• 可輸入閥門測試所需詳細資訊，操作員，時間，日期，扭力限制和角度/轉數限制
• 正向/反向迴圈至用戶設定的迴圈數值，最高可達32,000°
• 1個扭力感測器埠，用於“.LOGA”或“.LOG”連接
• 1個雙電磁閥埠，用於連接閥門元件
• 1個手持遙控器輸入埠
• 2個極限開關埠（用於感測器無法測量角度的位置）
• 1個自訂壓力感測器埠（ 2mV/V），用於資料記錄（非工具關閉）
• 1個RS232+1個USB資料輸出埠
• 即時扭力及角度或扭力及轉數資料流程
• 採集測試資料並以CSV格式輸出至外接U盤，用於生成定制化測試報告及圖表
• 急停按鈕及扭力超載限制功能
• 閥門測試控制器套組內帶有手持遙控器的工具控制器，配合AC伺服驅動或氣動工具一起使用

VALVE TESTING SYSTEM –  Introduction:-

Typical applications include the testing of Ball Valves requiring cyclical rotation 0 – 90˚ / 90 – 0˚, whilst recording torque vs angle data. Testing of Gate Valves / Valve Actuators by opening & closing whilst recording torque vs angle / turns data. The test must be remotely controlled from outside of the test chamber, where the test valve is pressurised.

• 10” touchscreen HMI & PLC housed in painted steel enclosure for indoor / workshop use
• Test data capture and output in CSV format onto external USB drive, time & date stamped
• Up to 20 targets can be set against a test
• Generate customer test reports and produce graphs
• Real time torque & angle or torque & turns data streaming via RS232 serial port
• Precision controlled low noise AC servo drive
• Operates Pneumatic (via solenoid valves), or AC servo drive tools
• Using the AC servo drive an optional lock can be added to hold a butterfly valve at a prescribed angle
• Dedicated input ports for pressure, temperature and proximity sensors
• Controller available as separate component to upgrade existing valve testing kits
• Automatic recognition of Smart transducers
• Forward / reverse cycling – user programmable number of cycles, variable up to 32,000 sweeps
• Emergency stop button and torque overload limit function
• Utilises Norbar’s tried and tested PneuTorque multiplier along with Torque and Angle Transducers – various capacities available
• Torque Range: 100 – 300,000 N·m (capacities up to 500,000 available on application)
• Powerful brushless motor is quiet and maintenance free
• Option to include network capability

3通關閉閥

雙電磁閥組裝

*適用於特殊工具控制器

這篇文章 工具控制器 — 基於TTT 最早出現於 鴻石國際股份有限公司。