為方便起見，現在可以從“輕便系列”的扭力倍力器和與之相配的扭力扳手包裝中購得扭力倍力器，最大扭力達4000N·m。這就使得操作者從一個堅固的攜帶盒中得到鎖附螺栓的一切工具。攜帶盒的空間也可放置一些附件例如套筒等。

提供每個倍力器獨特的且可追溯的校准證書，每把扭力扳手提供一致性聲明，以方便用戶對重要的應用，精確地計算扭力倍力器的輸入扭力。

HandTorque 輕便系列-扭力倍力器和扭力扳手套裝 – 功能介紹

• 所有套裝都包含一個’SpinNor’ ，它幫助反作用力臂快速定位。
• 所有型號的扭力倍力器都包含一個反回彈安全裝置。

HandTorque® Compact Series KITs – Introduction:-

A Norbar HandTorque Multiplier has been combined with an appropriate NorTorque Torque Wrench to provide a complete kit for your bolting application.

Supplied in a robust carry case, with space for accessories such as sockets.

Functions:-

HandTorque:-

• Guaranteed accuracy of better than +/-4%.
• Anti Wind-Up Ratchet available on 25:1 models for easier and safer operation.
• A variety of reaction styles are available for maximum versatility.
• Electronic torque transducers can be fitted for precise torque monitoring.
• Available in a variety of ratios and output square drive sizes.
• Corrosion resistant finish.
• Supplied with traceable calibration certificate stating exact ratio. Calibrated from 20% of maximum capacity.

Torque Wrench:-

• Push through ratchets with a narrow engagement angle of 5° for working in tight spaces
• Convenient hanger feature for tool storage also aids wrench unlocking and adjustment
• Just eight turns to cover the entire scale
• Micrometer scale applying to the primary torque units (N·m on a dual scale wrench) for simple and error free setting
• Push/pull lock is fast and intuitive to use and prevents accidental adjustment of the set torque
• Light and fast adjustment saves operator time and effort
• Supplied with a Declaration of Conformance, which meets the requirements of ISO 6789-1:2017

About Norbar, world leaders in torque equipment

HandTorque 輕便系列-扭力倍力器和扭力扳手套裝 – 產品規格

這篇文章 HandTorque 輕便系列-扭力倍力器和扭力扳手套裝 最早出現於 鴻石國際股份有限公司。

HandTorque® HT3系列 扭力倍力器 套裝 – 功能介紹

• 5:1扭力放大比，精確度為±4%。
• 提供2個不同形式的反作用力臂，使之具有廣泛的用途。
• 堅固的結構意味著最低限度的維修量和很長的使用壽命。
• 裝在手提箱內供貨，這一倍力器是重型車輛工具箱中理想的常備工具。
• 扭矩倍力器套裝在手提箱內配有一個3/4＂輸出驅動方頭。
• 可僅選購倍力器本體（無反作用力臂和外箱）。
• 1300Nm，料號為17218。
• 2700N·m，料號為17219。

HandTorque® HT3 Torque Multiplier Series

What is a Torque Multiplier?

A torque multiplier is a device that increases the torque that can be applied by an operator. This is because the power output cannot exceed the power input, the number of output revolutions will be lower than the number of input revolutions (Torque x rpm = Power).

Why use a HandTorque® Multiplier?

• Safety – use of long levers can be dangerous. Torque multipliers allow for a reduction in the lever length or operator effort
• Space limitation – the use of a long lever may be impossible due to the available space
• Accuracy – torque will be applied most accurately when it is applied smoothly and slowly. Torque multipliers enable this by removing much of the physical effort from the tightening task

Functions:-

• 5:1 torque multiplication, accuracy guaranteed better than ±4%.
• Supplied with two reaction bar styles for maximum versatility.
• Robust construction means minimal maintenance and long life.
• Supplied in a carrying case, the Highwayman is ideal for inclusion in the heavy vehicle kit.
• 1300 N.m version has a spare 3/4″ output square included in the kit.
• If calibration is required, a UKAS accredited calibration certificate may be ordered (at extra cost)

About Norbar, world leaders in torque equipment

倍力器套裝裝在手提箱內提供，內有一個圓棒狀反作用力臂和一個足型反作用力臂（17220同樣包含一個¾”驅動方頭）

這篇文章 HandTorque® HT3系列 扭力倍力器 套裝 最早出現於 鴻石國際股份有限公司。

HandTorque® HT3-1000 扭力倍力器 套裝 – 功能介紹

• 5:1的標稱扭力放大倍數與反作用力臂有關，5:1是標稱扭力放大倍數。安裝足型反作用力臂的為8:1，安裝直線型反作用力臂的為4.9:1
• 扭力放大倍數的精確度為±4%
• 小而輕便的設計
• 堅實的銀色金屬粉末噴塗提升了美觀性
• 提供2個不同形式的反作用力臂，使之具有廣泛的用途
• 改進了的可8個方向挂靠的靈巧的反作用力臂可快速變換
• 堅固的結構意味著最低限度的維修量和很長的使用壽命

HandTorque® HT3-1000 Torque Multiplier

The HandTorque­® HT3-1000 has been designed for use where it is necessary to provide higher torques than would otherwise be possible due to limitations of space or operator strength. Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque.

What is a Torque Multiplier?

A torque multiplier is a device that increases the torque that can be applied by an operator. This is because the power output cannot exceed the power input, the number of output revolutions will be lower than the number of input revolutions (Torque x rpm = Power).

Why use a HandTorque® Multiplier?

• Safety – use of long levers can be dangerous. Torque multipliers allow for a reduction in the lever length or operator effort
• Space limitation – the use of a long lever may be impossible due to the available space
• Accuracy – torque will be applied most accurately when it is applied smoothly and slowly. Torque multipliers enable this by removing much of the physical effort from the tightening task

Functions:-

• Quick change cranked reaction with improved flexibility allowing reaction in 8 orientations
• Robust construction means minimal maintenance and long life
• Small and compact design
• Supplied with 2 reaction bar styles for maximum versatility
• If calibration is required, a UKAS accredited calibration certificate may be ordered (at extra cost)

About Norbar, world leaders in torque equipment

這篇文章 HandTorque® HT3-1000 扭力倍力器 套裝 最早出現於 鴻石國際股份有限公司。