HANDTORQUE® HT4系列 扭力倍力器

HANDTORQUE® HT4系列 扭力倍力器

扭力倍力器設計用於狹小空間，或因操作人員力量的限制，而需要提供更高的扭力方式。

HANDTORQUE® HT4系列 扭力倍力器 - 功能介紹

• 堅固的結構意味著最低限度的維修量和長使用壽命。
• 真實的15.5:1（3000N·m）或者26:1（4500N·m）放大比，精確度為±4%。
• 大的扭力放大比容許使用一個小的扭力扳手。
• 裝在手提箱內提供並附有驅動方頭更換件。
• 反回彈安全裝置使倍力器更安全更實用。
• 角度量角器使得扭力加角度的鎖緊方式變得簡單易用。

HandTorque® HT4 Torque Multiplier Series

What is a Torque Multiplier?

A torque multiplier is a device that increases the torque that can be applied by an operator. This is because the power output cannot exceed the power input, the number of output revolutions will be lower than the number of input revolutions (Torque x rpm = Power).

Why use a HandTorque® Multiplier?

• Safety – use of long levers can be dangerous. Torque multipliers allow for a reduction in the lever length or operator effort
• Space limitation – the use of a long lever may be impossible due to the available space
• Accuracy – torque will be applied most accurately when it is applied smoothly and slowly. Torque multipliers enable this by removing much of the physical effort from the tightening task

Functions:-

• Robust construction means minimal maintenance and long life.
• High ratios allow the use of a small torque wrench.
• Supplied in carrying case with replacement square drive.
• Anti Wind-Up Ratchet (Anti Backlash) fitted to allow safer and more practical operation.
• Angle protractor for easy torque and angle tightening.
• True 15.5:1 torque multiplication, accuracy guaranteed better than +/-4%.
• If calibration is required, a UKAS accredited calibration certificate may be ordered (at extra cost)

About Norbar, world leaders in torque equipment