這篇文章 固定銷的擴口頭 最早出現於 鴻石國際股份有限公司。

這篇文章 固定銷的盒頭 最早出現於 鴻石國際股份有限公司。

這篇文章 固定銷的開口端頭 最早出現於 鴻石國際股份有限公司。

這篇文章 16mm 插口的空白端 最早出現於 鴻石國際股份有限公司。

這篇文章 用於 16 毫米插口的棘輪頭 最早出現於 鴻石國際股份有限公司。

這篇文章 用於 16 毫米插口的喇叭口 最早出現於 鴻石國際股份有限公司。

這篇文章 用於 16 毫米插口的箱頭 最早出現於 鴻石國際股份有限公司。

這篇文章 用於 16mm 插口的開口端頭 最早出現於 鴻石國際股份有限公司。

直角齒輪箱-功能介紹

• 操作者正確使用此款槍式握把，可在胸部高度及以上的螺栓應用工位獲得更舒適的操作體驗。
• 相對直角齒輪箱，工具手柄可旋轉360°，從而獲得最舒適安全的位置。
• 手柄及直角齒輪箱可相對工具齒輪箱完成轉位，確保反作用力不會回傳至操作者。
• 使用鋼質進行製造，堅固耐用且使用壽命長。
• 直角齒輪箱可作為獨立產品購買並由諾霸對現有諾霸工具進行改裝。
• 諾霸建議在安裝直角齒輪箱後重新校準工具，如無法校準，則假設效率為97%。

Right angle gearbox – function introduction

The Right Angle Gearbox enables the benefits of Norbar’s pneumatic and electric torque tools to be brought to a host of applications from which they are currently excluded due to space restrictions.The Right Angle Gearbox provides most ET, PTS and PTM tools with a 90° angle of operation.

As the tool rotates on two different planes (the Right Angle Gearbox Adaptor and the Gearbox itself), there is a risk of objects getting caught
between the tools reaction plate and the tools body. Ensure all obstacles are clear from this risk, such as: hands, air hoses and electrical wires.

• The handle and Right Angle Gearbox can index in relation to the tool gearbox meaning that reaction forces are not passed back to the operator
• Allows more comfortable operation of the EvoTorque2 on vertically bolting applications at chest height and above as the pistol grip is presented correctly to the operator
• The tool handle can rotate 360° in relation to the Right Angle Gearbox allowing the most comfortable and safest position to be found
• Manufactured from steel, the Right Angle Gearbox is robustly constructed for durability and long life.

Reaction Safety

These tools feature a reaction plate to take the reaction forces. This creates a crushing hazard if the operator places a hand on the reaction
plate. The reaction plate ensures all reaction forces are contained, so torque reaction is not passed back to the operator.
When in use the reaction plate rotates in the opposite direction to the output drive square and must be allowed to rest squarely against a solid object or surface adjacent to the fastener to be tightened as demonstrated in these illustrations.

IMPORTANT: WE RECOMMEND THE FULLY ASSEMBLED TOOL SHOULD BE RECALIBRATED. ALTERNATIVELY, YOU SHOULD ASSUME AN EFFICIENCY OF 97%.

這篇文章 RA直角齒輪箱 最早出現於 鴻石國際股份有限公司。

EVOTORQUE 2 電動扭力扳手-功能介紹

• 多扭力測量單位選擇，Nm、lbf·ft、ft·lb及kgf·m。
• 按照工具額定值的20%至100%範圍進行校準。
• 支持扭力、扭力 & 角度及扭力核查模式。
• 在扭力 & 角度及扭力核查模式下，可以從工具最大值的10%起設定扭力。
• 顯示並在主板上存儲最終扭力值或扭力與角度值。
• 3000個讀值存儲, 附帶時間和日期。
• 成功完成連接應用後給予明確提示。
• USB和Bluetooth®4.0數據傳輸（也稱為Bluetooth®Smart）。
• 配備PC軟體“EvoLog”，用於數據管理與工具設定。
• 可下載12個用戶ID至工具，每個用戶可以單獨存儲結果。
• 每個工作組可設置20個獨立目標值和20個工作組目標值。
• 對於不會使用EvoLog軟體的用戶，結果可以以CSV(逗號分隔值)的格式輸出給用戶。
• 可通過EvoLog生成並儲存實時圖表。
• 扭力與角度功能含最終扭力。
• “使用計數器”可以查看該工具自上次重置計數以來的使用次數。
• “操作方向”功能主要設計用於拆卸螺栓。在進行順序擰緊時，可在不中斷順序的情況下撤銷未正確擰緊的螺栓。
• 二級擰緊提供扭力閾值與角度目標值更快的應用。
• “轉角”選項可以用於檢查裝配過程中是否已擰緊螺栓。
• 工具可集成至第三方控制系統中。
• 兩種不同鎖定級別。鎖定級別1與之前鎖定相同，鎖定級別2則強制執行屏幕運行或目標值而不允許用戶修改。
• 最大查核模式目標角度為720°。

EVOTORQUE 2 電動扭力扳手 – 產品參數

EvoTorque 2-110 V

EvoTorque 2-230 V

EVOTORQUE 2 Electric Torque Wrench – Introduction:-

The EvoTorque®2 is an electronic torque tool designed to accurately apply torque to threaded fasteners. Tools are factory calibrated to ±3% of reading.
The unique ‘intelligent joint sensing’ technology continually measures the joint during tightening and when necessary, employs dynamic braking to
avoid torque over-shoot due to motor inertia. Consequently, EvoTorque®2 can apply torque accurately over a wide range of joint rates from hard (high
torque rate) through to soft (low torque rate). All EvoTorque®2 tools are highly tolerant of supply voltage and frequency variation. If the supply voltage
is outside of tolerance then, as a safety feature, the tool will be prevented from starting.
The EvoTorque®2 has the ability to memorise multiple targets, work IDs, user IDs and readings. A work sequence (flow) can be performed on the
EvoTorque®2, taking the user through a pre-defined tightening sequence. The tool has four modes of operation: Torque, Torque & Angle, Torque & Angle
with Final Torque and Torque Audit. The unique Audit Mode is a sophisticated feature for testing pre-tightened bolts with minimal impact on the original
fastening torque and can provide quality control data for monitoring joint performance over time. With accuracy and repeatability of ±3% of the setting,

Functions:-

• ‘Usage’ counter gives the ability to see the amount of times the tool has been used since the last reset
• “Operation Direction” designed primarily for undoing bolts. When doing sequence tightening, it is now possible to undo an incorrectly tightened bolt without interrupting the sequence
• 2 Stage Tightening gives faster application of a Snug Torque & Angle Target
• “Turn Angle” option can be used to check if bolts have already been tightened in an assembly process
• Allows tool integration into third party control systems
• Maximum Audit Mode target angle increased to 720 degrees
• Ability to produce and store real time graphs via EvoLog
• 2 different lock levels, lock level 1 as per previous lock, lock level 2 will not allow user to exit the run screen or change the target
• Torque, Torque & Angle, Torque & Angle with Final Torque or Torque Audit Modes
• Supplied in a bespoke robust and durable Pelicase
• Each tool is supplied with a traceable calibration certificate
• For more features please see link to sales leaflet under catalogue below
• Calibrated to 20% – 100% of tool’s maximum capacity
• Operational targets can be set from 10% of tool capacity

這篇文章 EVOTORQUE 2 電動扭力扳手 最早出現於 鴻石國際股份有限公司。