Special Extension Spanners & Adaptors

To apply Torque in awkward spaces: Accessories to complement the Dial Measuring Wrench Range更多
Special Extension Spanners
Where design or space limitations preclude the use of a dial wrench and a standard nut socket, special extension spanners can be manufactured to allow access
See illustrations for typical examples. When ordering these special attachments, please supply the following information:

(A) Square drive size

(B) A/F size of spanner end

(C) End type - Ring, Open or Flared

(E) Centred distance between the square drive and the spanner end fitting

(T) Maximum Torque to be applied

Extension Adaptors for ADS and BDS Wrenches

Torqueleader Extension Adaptors offer an alternative method of overcoming space and access limitations when using ADS and BDS Dial Measuring Torque Wrenches. The Adaptors enable the use of a wide range of end fittings with 16mm Spigot, 9x12 German and Wedge fixings. Each type of Adaptor is available with either a 3/8” or 1/2” female square drive and is easily fitted to the wrench male drive.

Attach the end fi tting to the extension adaptor

Fit the assembly to the wrench square drive, taking care that it is “in-line” with the wrench body axis

Measure and note distance ‘E’ from centre of end fitting to wrench square drive

Special Extension Spanners & Adaptors

型號 ADS mm

ADS in

BDS80A/AS/E/ES mm BDS80A/AS/E/ES in 其他BDS mm

其他BDS in

CDS mm

CDS in

DDS mm

DDS in

EDS mm

EDS in

尺寸L 190 7.5 368 14.5 445 17.5 635 25 850 33.5 1727 68

Due to the low torque ranges and high accuracy it is recommended that Models ADS 4 & ADS 8 should not be used with extension spanners





16mm 凸圓頭 3/8 A96102
16mm 凸圓頭 1/2 A96103
German 9 x 12定位方頭 3/8 A96112
German 9 x 12定位方頭 1/2 A96113
楔型接頭 3/8 A96122
楔型接頭 1/2 A96123


Copyright@2014 鴻石國際股份有限公司      管理登陸